0

Your Cart is Empty

KEC HS-1208

Horse Stall Heaters - 800W Kalglo Infrared Radiant Heaters

Kalglo electric radiant infrared horse stall heaters are by far the most commonly used heaters for horse barns, stalls, and/or wash racks. These horse stall heaters are typically installed directly over the area to be heated and are plugged into a switched outlet on the ceiling with either an on/off switch on the wall (for stalls) or a Timer Switch that will automatically turn off the heater after a pre-set time (for wash stalls, tack rooms, etc.).

***FREE SHIPPING TO THE CONTINENTAL UNITED STATES***

Benefits

  • The radiant infrared heating system allows you to only heat your horses or other key areas and not the whole barn.
  • Provide a large radiant heat pattern without any visible light.
  • Allow you to focus your heating efforts to keep your horses warm and comfortable.
  • These heaters are great for newborn foals or sick horses.
  • Get your horses dry much faster after a wash in their wash stalls.
  • Splashing will not damage heating element while you are washing your horse.
  • Keep your show horses warm during those times that they are quickly shedding their winter coats.
  • Save wear and tear on costly horse blankets.
  • The durable metal sheath heating element lasts many years.  
  • The heating elements carry a 5-year limited warranty against premature burnout and are field replaceable.
  • Easy to install
  • Made in the USA!

Kalglo HS Series

Base model heaters that are either turned on full or off at a wall switch.  Normally, they are used without any controls or thermostats in wash stalls, grooming areas, or wherever the subject is under the heater for less than one hour.

These heaters can also be used with wall mounted manual intensity controls.  The controls let you fluctuate the heater intensity to off, low, medium, or high.  It does not shut the heater off at a certain air temperature.  Instead, the heater will operate at the set intensity level until you change it or turn it off.  The wall mounted intensity controls come in two different models.  The PR-1218RS is used for 120-volt heaters and the PR-2436RS is used with 240-volt heaters.  You can purchase the controls separately or as part of a package.  To purchase one or more of these controls, please click on the product numbers above.

Kalglo HS/RS Series

The HS/RS Models have a built-in power regulator for manual intensity control.  These controls operate using the same concept as above; however, they are built into the heater making the wall mounted controls unnecessary.  The controls can be manually set as follows: OFF, 23-70% power, or ON FULL. Changes in surrounding air temperature do not affect output of heater.

Optional Thermostats

Thermostats should be considered an option only and is not needed unless no one will be around to turn off the horse stall heater.  Thermostats work independently of the heaters and sense the air temperature in the barn and not the radiant heat under the heater. A thermostat should not be positioned within the radiant heat pattern or it will shut the heater off within minutes.  To learn more about the thermostats or to purchase one, visit our Kalgo Thermostat Page.

Infrared Radiant Horse Stall Heater Specs

HS-1208

  • Base Heater – On or Off only
  • Volts: 120
  • Amps: 6.7
  • Watts: 800
  • Size: 35" x 6" x 6"
  • Weight: 7 lbs.
  • Aluminum Body
  • Beige
  • 7-foot power cord and plug included.
  • Installation hardware and 13 feet of chain to hang the heater included.

HS-1208RS

  • Heater with manual intensity control built in.
  • Volts: 120
  • Amps: 6.7
  • Watts: 800
  • Size: 35" x 6" x 6"
  • Weight: 7 lbs.
  • Aluminum Body
  • Beige
  • 7-foot power cord and plug included.
  • Installation hardware and 13 feet of chain to hang the heater included.

HS-2408

  • Base Heater – On or Off only
  • Volts: 240
  • Amps: 3.4
  • Watts: 800
  • Size: 35" x 6" x 6"
  • Weight: 7 lbs.
  • Aluminum Body
  • Beige
  • 7-foot power cord and plug included.
  • Installation hardware and 13 feet of chain to hang the heater included.

HS-2408RS

  • Heater with manual intensity control built in.
  • Volts: 240
  • Amps: 3.4
  • Watts: 800
  • Size: 35" x 6" x 6"
  • Weight: 7 lbs.
  • Aluminum Body
  • Beige
  • 7-foot power cord and plug included.
  • Installation hardware and 13 feet of chain to hang the heater included.

More Information About Heating You Horse Barn and/or Horse Stalls

Which Model Heater and How Many Do I Need?

Frequently Asked Questions for Kalglo Horse Stall Heaters