0

Your Cart is Empty

KEC-HTP-1

Kalglo Thermostats for Infrared Radiant Horse Stall Heaters

Kalglo Thermostats for Infrared Radiant Horse Heaters should be considered as an option for those horse owners that may have to be away and will not be around to turn the heaters on and off.  The thermostats work independently of the horse heaters and measure the air temperature in the barn and not the radiant hear under the heater.  Do not place the thermostat directly within the radiant heat pattern or it will shut of the heater within minutes.

***FREE SHIPPING IN THE CONTINENTAL USA***

Portable Thermostat – KEC-HTP-1

  • Temperature Range: 10° F - 100° F
  • Operates: 1 - 120V Horse Heater Only
  • Operation
    1. Plug the thermostat into an outlet of the proper voltage for the heating equipment.
    2. Plug the heater cord into the receptacle holes in the thermostat’s plug. If the heater has a built-in on/off switch or heat regulator, be sure it is in the ON position.
    3. With power on, turn thermostat knob toward the “warmer” position (clockwise) or “cooler” position (counterclockwise) until the heater goes on.
    4. Adjust, as needed, to set air temperature at which you want the heater on.

Hardwired Thermostat – KEC-HTH-1

  • Temperature Range: 10° F - 100° F
  • Operates: 1 - 120V or 240V Heater
  • Operation
    1. Wire thermostat in series with the electrical circuit supplying the heater outlets. Be sure to properly ground the thermostat enclosure and the receptacle.
    2. If a power regulator is also wired in the same circuit, wire the thermostat in series before the power regulator.
    3. With power on and all other on—off switches in the “on” position, turn thermostat knob toward the “warmer” position (clockwise) until the heater goes on.
    4. Adjust, as needed, to set the air temperature at which you want the heater to be on.